DIN 2353 Fittings, Single Ferrule Fittings, Tube Fittings DIN 2353, Twin Ferrule Fittings, Double Ferrule Fittings, 37 Degree Flare Fittings, Flare Fittings, DIN 3015 Pipe Clamps, Hydraulic Flanges, SAE Flanges, Quick Release Coupling, Valves, Hose End Fittings, Mumbai, India.



	Hydraulics Fittings

		Single Ferrule Fittings

		Twin Ferrule Fittings

		37 Degree Flare Fittings

		Pipe Fittings

		Socket Weld

	Hydraulics Flanges

	Pipe Clamps

	Valve

	Hoses End Fittings

	Quick Release Coupling (QRC)

New Products

Split Collet Coupling

Metal Seal Fittings

Bitting Machine

Export To

Europe

Russia

Asia

Dubai

Singapore

Contact Us

Corporate Office :

46,1st Floor, Jagat Satguru Ind. Estate Kotkar, Off., Aarey Road, Goregaon (E), Mumbai - 400 063.India.

Tel : +91-22-2927 09 61

+91-22- 6505 09 51

Fax :+91-22-2927 09 60

Register Office :

704, Kent Heights, Vardhaman Nagar,Nursing Lane, Malad (W.), Mumbai - 400 064. India.

DIN 2353 Fittings, Single Ferrule Fittings, Tube Fittings DIN 2353, 24 Degree cone Fittings, Twin Ferrule Fittings, Double Ferrule Fittings, Ermeto Type Fittings, Ermeto Type Fittings, 37 Degree Flare Fittings, Flare Fittings, DIN 3015 Pipe Clamps, Hydraulic Flanges, SAE Flanges, Quick Release Coupling, Valve, Hose end fittings, Hose Flanges, Bite Type Fittings, Ermeto Type Fittings, 24 Degree cone Fittings, Double Ferrule Fittings, Hydraulic Fittings, Flare Fittings, Socket Weld Fittings, QRC, SAE Flanges, Tube Fittings, Pipe Fittings, Tube Clamp, Pipe Clamp, Flanges, Needle Valve, Ball Valve, Check Valve, Flow Control Valve, Manifold Valve, Twin Pipe Clamps, Light Duty Pipe Clamps, Heavy Duty Pipe Clamps, Through Valve Coupling, Quick Release Coupling, Single Check Valve Coupling, Double Check Valve Coupling, Quick Disconnect Coupling, Split Flanges, Union Flanges, Double Ferrule Fittings, Flanges, Split Flanges & Union Flanges, Single Ferrule Tube Fittings, Double Ferrule Tube Fittings

Choose Language :

Split Collet Coupling

J. J. Split Collet Coupling provides leak free, safe, versatile & low installed cost.

Size

6mm to 50mm, ¼” OD to 2” OD

Pressure

W.P. upto 100 Bar to 680 Bar depending on size

Material

Steel, Stainless Steel

Surface Treatment

Steel – Zinc Coated (A3C) Phospatised or Trivalent Cr.

Stainless Steel – Electro polished, Nut Silver Plated to avoid Galling

Split Collet Coupling assembly consists of:

Body	It locates Tube & Oring Seal
O Ring	Oring functions as diametric seal between body & tube OD
Nut	Nut retains sealing mechanism & closes split collet onto tube
Back up washer	Back up washer holds the Oring
Split Collet	Split collet holds the tube in exact position even in high pressure & vibration


	Features of Split Collet Coupling


1. Low installed Cost
	a. Simple & Rapid Assembly
	b. No special Assembly equipment required
	c. No Bitting, Flaring & Welding required
	d. The units can be removed without disturbing the pipe works
	e. The Split collet coupling & tube are reusable
	f. No Skilled work force is required as assembly is very simple
	g. Since welding is not required, Split Collet Coupling eliminates inset gas purging, non destructive testing & post weld pickling

2. Safe
	a. Clamping force rises with pressure
	b. Larger clamping area ensures minimum deformation of tube
	c. Tightening torque required is very low for a safe joint every time

3. Leak Free
	a. Due to unique design, sealing & clamping mechanism is separate
	b. Elastomeric 0 ring is very effective under pipe vibration, pressure pulsating or thermal expansion

Back

Site Design & Hosted By Mahesh Padiya (9833542484)