DIN 2353 Fittings, Single Ferrule Fittings, DIN 2353 Tube Fittings, Twin Ferrule Fittings, Double Ferrule Fittings, SAE Flanges, 37 Degree Flare Fittings, 24 Degree Cone Fittings, Flare Fittings ,DIN 3015 Pipe Clamps, Hydraulic Flanges, Double Ferrule Fittings, SAE Flanges, Quick Release Coupling, Valves, Hose End Fittings, Mumbai, India.



	Hydraulics Fittings

		Single Ferrule Fittings

		Twin Ferrule Fittings

		37 Degree Flare Fittings

		Pipe Fittings

		Socket Weld

	Hydraulics Flanges

	Pipe Clamps

	Valve

	Hose End Fittings

	Quick Release Coupling (QRC)

New Products

Split Collet Coupling

Metal Seal Fittings

Bitting Machine

Export To

Europe

Russia

Asia

Dubai

Singapore

Contact Us

Corporate Office :

46,1st Floor, Jagat Satguru Ind. Estate Kotkar, Off., Aarey Road, Goregaon (E), Mumbai - 400 063.India.

Tel : +91-22-2927 09 61

+91-22- 6505 09 51

Fax :+91-22-2927 09 60

Register Office :

704, Kent Heights, Vardhaman Nagar,Nursing Lane, Malad (W.), Mumbai - 400 064. India.

DIN 2353 Fittings, Single Ferrule Fittings, Double Ferrule Fittings, Tube Fittings DIN 2353, 24 Degree cone Fittings, Twin Ferrule Fittings, Double Ferrule Fittings, Ermeto Type Fittings, Ermeto Type Fittings, 37 Degree Flare Fittings, Flare Fittings, DIN 3015 Pipe Clamp, Hydraulic Flanges, SAE Flanges, Quick Release Coupling, Valve, Hose end fittings, Hose Flanges, Bite Type Fittings, Ermeto Type Fittings, 24 Degree cone Fittings Manufacturer, Double Ferrule Fittings, Hydraulic Fittings, Flare Fittings, Socket Weld Fittings, QRC, SAE Flanges, Tube Fittings, Pipe Fittings, Tube Clamp, Pipe Clamp, Flanges, Needle Valve, Ball Valve, Check Valve, Flow Control Valve, Manifold Valve, Twin Pipe Clamps, Light Duty Pipe Clamps, Heavy Duty Pipe Clamps, Through Valve Coupling, Quick Release Coupling, Single Check Valve Coupling, Double Check Valve Coupling, Quick Disconnect Coupling, Split Flanges, Union Flanges, Double Ferrule Fittings, Flanges, Split Flanges & Union Flanges, Single Ferrule Tube Fittings, Double Ferrule Tube Fittings

Choose Language :

Hydraulics Fittings : Single Ferrule Fittings / Din 2353 Fittings

“J. J.” high pressure steel fittings are manufactured to DIN 2353 Fittings specification and ISO 8434 – 1 for ease of Interchangeability. These DIN 2353 Fittings are available for different pressure rating from 100Bar to 630Bar

Type

Flare less Bite Type (Single Ferrule Fittings) Weld Nipple Type

Series

LL (Very Light), L (Light), S (Heavy)

Size

4mm to 42mm, 1/8”OD to 2”OD, 1/8”NB to 2”NB

Material

Steel, Stainless Steel, Brass (From extruded bar or forging)

Pressure

Ranging from 100Bar to 630Bar depending on type and size

Material

Steel, Stainless Steel, Brass (From extruded bar or forging)

Standard

DIN 2353 Fittings / ISO 8434 - 1

Surface Treatment Top Bottom Plate

Steel	–	Zinc Coated (A3C) Phospatised or Trivalent Cr.
Stainless Steel	–	Electro polished, Nut Silver Plated to avoid galling.
Brass	–	Natural

THEORY OF OPERATION

“J. J.” Single Ferrule Fittings / Din 2353 Fittings is a three piece design consisting of a body portion, a coupling nut and a double ferrule fittings. During the assembly the nut is progressively tightened causing hardened double ferrule fittings to slide along the inner conical seat of the body and grip the tube. Tightening the nut, ring deforms due to 24 degree cone of fittings and bites into the steel tube, producing deep cut on the tube. The cut is visible on the outer diameter of the tube. This cut on the tube acts as metallic interlock and makes the joint leak proof at high pressure and under vibration

ASSEMBLY

Before Assembly	After Assembly



RECOMMENDATION
Use Seamless tube as per Standard ST37.4 or DIN 1630 – 2391 for proper biting on tube.

Back